OxyGo FIT Machine Li-Ion Battery BA-300 PULADU Iongen 14.4V

PULADU Iongen BA-300 Li-Ion Battery 14.4V for OxyGo FIT Machine

► About PULADU Iongen BA-300 Li-Ion Battery 14.4V for OxyGo FIT Machine

The batteries power the OxyGoFit® without the need to connect to an external power source. When fully charged, a single battery provides up to 2.7 hours of operation. Both batteries provide up to 5 hours of operation. The batteries are rechargeable when properly installed in the OxyGoFit® and the generator is connected to an AC or DC power source. The charging time is up to 3 hours for a single battery and up to 5 hours for two batteries. Refer to the information in the Battery Care and Maintenance section.

► Installing the Battery

Push the OxyGoFit® battery in until the latch returns to the up position.

► Warning

The OxyGoFit® battery serves as an auxiliary power source when the external AC or DC power source is interrupted, either planned or unexpectedly. When using the OxyGoFit® with an external AC or DC power source, ensure that the OxyGoFit® battery is properly inserted into the device. This process ensures uninterrupted operation and activates all alarms and warnings when the external power source is interrupted.

► Battery User Manual

Ensure that the battery is in place and charged. Unplug the OxyGoFit®. When the OxyGoFit® is running on battery power, the battery will discharge. The screen shows the estimated remaining usage (%) or the number of minutes of usage (min).

When the generator detects that the battery is low and there are less than 10 minutes remaining, a low priority alarm will sound. When the battery is exhausted, the notification takes priority. If the battery life is low, do one of the following:

• Connect the OxyGoFit® to an AC or DC power source using the AC power or DC cable.

• Turn off the OxyGoFit® (press the ON/OFF button) and replace with a charged battery. To remove the battery, press and hold the battery lock button and slide the battery out of the hub.

• If the battery is exhausted, charge it or remove it from the generator.

If the OxyGoFit® is running on AC or DC power, the battery will charge during operation. Leaving the OxyGoFit® plugged in after it is fully charged will not damage the generator or battery.

► Specification of PULADU Iongen BA-300 Li-Ion Battery 14.4V for OxyGo FIT Machine

Thank you so much for your attention .If you're interested in OxyGo FIT Machine Li-Ion Battery BA-300 PULADU Iongen 14.4V ,feel free to contact us .Thank you .

OxyGo FIT Machine Li-Ion Battery

BA-300 Li-Ion Battery

OxyGo FIT Machine Li-Ion Battery BA-300 PULADU Iongen 14.4V Images