PHiliphh Goldway G30 patient monitor Spo2 board M1020-66414 Hospital Medical Equipment Parts
PHiliphh Goldway G30 patient monitor Spo2 board M1020-66414
► Brief Introduction
The PHiliphh Goldway G30 patient monitor Spo2 board M1020-66414 is a specific component or circuit board used in the PHiliphh Goldway G30 patient monitor for measuring and monitoring a patient's oxygen saturation level (SpO2). It is responsible for acquiring and analyzing the signals from the SpO2 sensor to provide accurate readings and display the information on the patient monitor's screen.
► Features
- SpO2 Measurement: These boards use a sensor attached to a patient's finger, toe, or earlobe to measure the oxygen saturation levels in the blood.
- Pulse Rate Measurement: Along with SpO2 levels, the board also measures the patient's pulse rate.
- Alarm Function: The board can be programmed to set high and low thresholds for SpO2 and pulse rate levels. If these thresholds are breached, an alarm will notify healthcare providers.
- Display: Patient monitors usually have a display screen that shows real-time SpO2 and pulse rate numbers.
- Data Logging: Some advanced SpO2 boards can store patient data over time, allowing healthcare providers to track and analyze trends.
► How to use
Turn on the patient monitor by pressing the power button.
Ensure that the SpO2 board is securely connected to the patient monitor.
Connect the SpO2 sensor cable to the SpO2 board. The cable usually has a connector that matches the board's port.
Place the SpO2 sensor on the patient's finger, toe, or earlobe (depending on the type of sensor being used).
Ensure that the sensor is securely and comfortably attached to the patient's body part.
The patient monitor should detect the sensor and begin displaying the SpO2 readings on the screen.
Monitor the SpO2 readings for accuracy and consistency.
If needed, adjust the sensor placement or check the patient's condition to ensure accurate SpO2 measurements.
The patient monitor may also display other vital signs such as heart rate, temperature, blood pressure, etc. depending on its capabilities.
Once the monitoring is complete, turn off the patient monitor and remove the SpO2 sensor from the patient.
► Specification
| Parameter | NBP, SpO2, HR, RR and Temperature |
| Screen size (apprx) | 10.4" |
| Fan | Fanless |
| Screen | Touchscreen |
| Weight (apprx.) | Approx. 4 kg |
| Waves | Yes |
| Battery (apprx) | approx 2.5 hours |
| Trend review | Yes |
| Standard measurement | ECG/ST/QT/RESP/ SPO2 |
| ECG | EASI, QT Analysis and ST |
| RESP | Impedancemetry lead II or lead I |
| SpO2 | FAST SpO2 |
| Temperature | Yes |
► Contact us
We provide wide range of medical equipment’s to help medical professionals, healthcare institutions, biomedical engineers, administrators, technicians reduce capital cost.
If you want to know more information about our company or products, or if you have any good suggestions for our products and services, or if you are unclear about our warranty period, please kindly contact us.
Thank you for your cooperation. Looking forward to establishing a long-term good cooperative relationship with you.
Pls contact us , if you are interested in PHiliphh Goldway G30 patient monitor Spo2 board M1020-66414.
Product Tags:
|
|
Patient Monitor Spo2 Board M1020-66414 Hospital Medical Equipment Parts Images
|
